1.2GHz 1000mW video wireless transmitter and receiver

1).Frequency 993-1280MHz 2).15 Channel adjustable 3).Wireless range:1000M(without block) 4).Interface:RCA 5).Voltage:12V DC

1.2GHz 1000mW video wireless transmitter and receiverProduct Name:video wireless transmitter and receiverModel:QLM-1215-1000A

 Specifications:  

	Item	Value
General	Transmission Frequency	ISM 993~1,280 MHz
	Output Frequency	993MHz;  1021MHz;1051MHz;1060MHz;1080MHz;  1100MHz;1120MHz;1140MHz;1160MHz;1180MHz;1200MHz;1220MHz;1240MHz;1260MHz;1280MHz;
	Manufacturer Suggested Reception Range	200-1000M "line of sight" (LOS) outdoor
	Modulation Mode	FM
	Operating Temperature	-10 ~ +50(Degree C) / +14~ +122(Degree F)
	Storage Temperature	-20 ~ +60(Degree C) / -4 ~ +140(Degree F)
	Operating Humidity	≤85%RH
Transmitter	BandWidth	20M
	Transmission Power	1000mW
	Consumption Current	450mA (Max.)
	Power Supply	DC +12V
	Dimensions(W×D×H)	88mm x 52mm x 20mm
	Antenna	SMA
Receiver	Receiving Sensitivity	≤-85dBm
	Video Output Signal Level	1.1Vpp±0.2Vpp@75 ohm, S/N >38dM
	Audio Output Signal Level	3.0Vpp±1Vpp@600 ohm
	Consumption Current	180mA(Max.)
	Power Supply	DC +12V
	Dimensions(W×D×H)	135mm x 80mm x 21mm
	Antenna	SMA

 Terms of Use:Please connect the antenna first before the power of transmitter starts, otherwise the transmitter will be burned/destroyed easily because most of the energy is consumed in it and the excess power cannot be released by the antenna.When the transmitter is working, don't touch the antenna because of the large power. Otherwise the high temperature of antenna will hurt your hands!!Please choose the right power for this product.The transmitter must work at the ventilated place. It can make the using life of transmitter much longer.Wireless transmission reception result might be affected due to different environmental and topographical conditions such as the weather, noise, the structure/material of the building, etc. For a better reception, make sure that the transmitter and the receiver are placing at least 5 feet above ground. Antenna must be attached on the transmitter before power up. Otherwise, the transmitter will be burned out because the excess power cannot be released by the antenna.This product must be used within the law. We are not liable under any circumstances if the device(s) is used for illegal purposes.User Instruction:Transmitter is 12V regulative power, receiver is 12V switch power, the center of jack is positive.Transmitter has a special cable for connection. The red connector is for power input, the black one is for vidicon power supply, the yellow one is for video output, and the white one is for audio output. The jack connects to the transmitter directly.Receiver has a special cable for audio and video. It connects the receiver and monitor. The VIDEO OUT in the receiver should be connected with the VIDEO IN of the monitor. The AUDIO OUT in the receiver should be connected with the AUDIO IN of the monitor.In default, you needn't adjust the system when all the components are connected together, the channel of transmitter and receiver are matched.Please connect the antenna first before the power of transmitter starts, otherwise the transmitter will be destroyed easily because most of the energy is consumed in it. If you want to change the channel, you can change the jumper's place, the jumper is at the side of transmitter. The switch must be changed at the same time, the switch is near the AUDIO OUT of receiver.Please select the outside directional antenna if the output is large power. If you use the small all-direction antenna, it will produce big transmitting current, the temperature of antenna will rise, transmitting power of antenna go down.The power of higher than 12V is not permitted.Make sure which is the positive or negative of power connector. The inside is positive, the outside is negative.If you want to transmit to a longer distance, please use the directional antenna, the transmitting distance of it is 2 or 3 times than the all-direction antenna's.

1.2GHz 1000mW video wireless transmitter and receiver